Main Bearing Bar Spacing:1-3/16 on center. 2. Bearing bar thickness:1/4 (or 5/16 or 3/8) as shown on the drawings. 3. Main Bearing Bar depth is to be based on loading requirements and the clear span shown on the drawings. 4. Cross Bar Spacing:4 on center. 5. Top of main bearing bars are to be smooth (or serrated as shown on the drawings).
32x5 Serrated Bars, 32x5 Serrated Bars Suppliers and offers 2,663 32x5 serrated bars products. About 1% of these are stainless steel bars. A wide variety of 32x5 serrated bars options are available to you, such as free samples, paid samples.
METRIC TABLE OF SAFE LOADS. W102-30. Stock mat nominal 915 mm x 7315 mm. U Safe Uniform Load, in KN per metre of width. C Safe Concentrated Load in lbs. per foot of grating width. D Deflection in mm. Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 124.0 Mpa.
Heavy Duty Steel GratingSteel Bar Grating with bearing bars thicker than 3/16" is considered to be "Heavy Duty" and carries the designation prefix "Type HD". Available bar thicknesses are 1/4" (6.4mm) , 5/16" (7.9mm) and 3/8" (9.5mm) in either plain or serrated surface. Standard depths range from 1" (25mm) up to 4" (102mm), although larger sizes are available upon request.
Industrial Steel Bar Grating Catalog - Metelmexdimensions:8-1/2, 9-3/4 and 11, lengths are also standard 30, 36,42 and 48, (other treads
Serrated Steel Grating:Serrated opening bar grating is mostly used with carbon steel galvanized or non galvanized. It has a common outline size:900 x 1400 mm, 900 x900 mm, 900 x 1200 mm. * Bearing Loading Bar Size :25mm x 5mm Serrated * Bearing Bar Pitch :30mm * Cross Bar Size :6mm Twisted * Cross Bar Pitch :100mm * Width :Open End
Metals Depot® 1" x 3/16" - Steel Grating Stair Tread Simply weld or bolt steel grating steps to stringer channels for quick fabrication. Diamond plate nosing is standard for added safety. Stair Treads are available in smooth or serrated depending on requirements. Call for custom sizes and types. Also available in Galvanized Steel, Aluminum, and Stainless.
Serrated Steel Grating - Steel Bar GratingThe serrated steel bars are welded, press-locked, swage-locked or connected by rivets to form different types of steel grating. Compared to the plain steel grating, which is available for almost all of the applications, the serrated steel grating is widely used in the
Steel grating stair treads are available fabricated to any size in type W welded, type DT dovetail pressure locked or type SL swage locked construction. Treads are manufactured with a defined visible nosing and pre-punched end carrier plates or angles, ready for bolting to the stair stringers. Type 19-W-4 Serrated with Checker Plate Nosing. Type 19-W-4 with Cast Abrasive Nosing.
Standard Grating Panels - Standard Sized and Custom Size Popular Standard Panels:Mild Steel, Non Galvanized Open End Standard Bar Grating Panels. 1. Standard grating panel, non-galvanized , open end ; 25x5 pitch 30mm (Plain) and cross bar (twisted bar 6 mm) pitch 100 mm 2. Standard grating panel, non-galvanized , open end ; 25x5 pitch 30mm (serrated) and cross bar (twisted bar 6 mm) pitch 100 mm 3.
Steel Bar Grating McMaster-CarrCross bars hold the bearing bars in place; bearing bars help distribute weight and must rest on supports. Use Fasteners for Metal Bar Grating to secure. Serrated grating provides maximum slip resistance. Powder-coated steel grating is for use in dry, noncorrosive areas. Galvanized steel grating is more corrosion resistant than powder-coated steel.
McNICHOLS® carries Welded Bar Grating Stair Treads with rectangular-shaped bearing bars (smooth or serrated), End Plates and Nosing. In stock are a variety of materials, shapes and sizes. Welded Stair Treads are strong and require little maintenance. Fabricated at our 19 locations. Call us today.
Welded Serrated Steel Bar Grating , Various Size Heavy Customized Serrated Steel Bar Grating With Hot dipped Galvanized . Description:1. Bearing Bar (Load Bar) Specifications (mm):The specification of plain type and serrated type bearing bar is 25 x 3 to 100 x 8; The specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.
Welded Serrated Steel Grating - Carbon Steel Black or HDGSerrated carbon steel grating . Twist bar rod. 25 mm height × 5 mm thickness. Size 3' × 20'. Untreated steel grating panel, standard sheet size unbanded 995 or 1005 × 5800 mm . 33 × 25 × 3/30/100 flat bar. 10 × 25 × 5/40/100 flat bar. 9 × 25 × 5/40/100 serrated.